Q&A on the Australian safety standard AS/NZS 60950.1:2011 with Amdt 1:2012

The following answers to the questions sent to me are my from own perspective, given for guidance only. These are not definitively authoritative, however they are given in good faith, so if you need to make business decisions on these matters you’d need to seek your own counsel, as no liability will be accepted for any possible errors or omissions or if something doesn’t cover your situation. If there are any errors in my responses below I’d be delighted for anyone to enlighten me further.

  1. AS/NZS 60950.1:2011 – This is already published in 2011; revised in Nov 2012 to add Amdt 1 issued by IEC TC108.
  2. Please advise if it is mandatory and if there is any effective date established?
    • PWR#: No specific dates have been established for use of Amdt 1 with telecommunications equipment at this time (but see item 6 below). It may be used now for non-telecommunications safety approvals (e.g. EPSs). Earlier editions would be usable only at the electrical regulators’ discretion.
  3. Any AU/NZS national differences?
    • PWR: There are no new mandatory national differences in the amendment, but note that AS/NZS 60825.1 can be used in lieu of IEC 60825-1. This is worth noting because the Australian laser standard also has significant national differences, and compliance with that might not mean compliance with the IEC standard has been achieved (worth keeping in mind for products sold overseas that were tested in Australia).
  4. ACMA is now attempting to adopt the standard in item 1 as its telecom standard.
    • PWR#: That is correct.
  5. ACMA is not introducing any significant national differences except as indicated at the website given below.
    • PWR#: ACMA is not introducing any differences that are not already in AS/NZS 60950:2011 + Amdt 1:2012.
  6. Will this standard be mandatory in AU/NZS for telecom equipment and if yes, what will be the effective date?
    • PWR#: Yes, but the date is a bit more complex… The ACMA “Standard” that’s being amended is essentially a hidden legal instrument that makes Australian Standard AS/NZS 60950.1 +Amdt 1 mandatory, and the ACMA standard essentially contains no technical requirements itself. The intent is that compliance with Australian Standard AS/NZS 60950.1 +Amdt 1 will satisfy the requirements in the ACMA standard (which is also given the same designation for legal reasons, but I’ll call it the “ACMA standard” to try to avoid confusion.) The ACMA standard, when published (probably in August/September) will then make the CURRENT REVISION of the Australian Standard mandatory on publication, and so on into the future. It also allows that products manufactured or imported within twelve months of the new Australian Standard or revision being published can be tested to the prior version of the Australian standard (but not to earlier versions than the one prior). This means, for example, that a product manufactured or imported up to 2013-11-09 (the first anniversary of the publication date of Amdt 1) may comply with AS/NZS 60950.1:2011 with or without Amdt 1:2012, however AFTER 2013-11-09, all new certifications must be done in accordance with AS/NZS 60950.1 + Amdt 1 in place. I hope this clarifies.

http://beta.acma.gov.au/theACMA/Consultations/Consultations/Current/draft-telecommunications-technical-standard-as-nzs-60950-1-2011-amendment-2013.

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: